Please note this is for the EXTENDER Frames ONLY for the Sweet Stencil Holder - not the holder itself - you can get that HERE
NOW IN STOCK
The 2 piece Extender set adds 1/8" (3mm) or 3/16" (4.5mm) to your Sweet Stencil Holder to accommodate a thicker cookie. Sweet Stencil Holder sold separately and required to use the extender frame.
To add 1/8" to stencil height, remove top frame from Sweet Stencil holder and attach the 1/8” Extender frame. Place stencil on top of Extender frame and attach the top frame of the holder to secure stencil.
To add additional height, place stencil on top of both Sweet Stencil holder frames and secure with the 1/8” Extender frame. (If cookie does not make contact with stencil, place clear lifter square under cookie)
Instructions & Care:
Remove top frame from holder by sliding it to release the magnetic hold.
Secure stencil between both frames to ensure contact with all four magnets. Do not allow top frame to snap down on holder.
Lift hinged frame by extension tab and place cookie on the base.
If using a placement guide, slip guide under plastic sheet and align with stencil and cookie.
Swipe with royal icing or airbrush.
Lift hinged frame, remove cookie and repeat.
To remove stencil from frame, slide top frame to release the magnetic hold then lift.
Multiple Stencilling has never been so easy and precise!
WASH IMMEDIATELY AFTER USE.
NOT DISHWASHER SAFE – Wipe with damp cloth or rinse with warm water and dry with soft cloth.
DO NOT use hot water as it can damage both the acrylic and magnets.
DO NOT leave immersed in water.
DO NOT use Glass cleaner, Alcohol or Acetone to clean.